Pioneer logo28,000 BTU heat pump

Pioneer 28,000 BTU Wall-Mount

Model #: YN030GMFI22M3E

Every spec on this page comes from an official certification record or a cited manufacturer document. The source is linked next to each value.

PioneerYNMini-split heat pump
Compare sellers

Where to buy

Check model number YN030GMFI22M3E at your preferred retailer.

We may earn a commission when you buy through seller links on this site. Learn more.

Pioneer YN030GMFI22M3E outdoor mini-split unit

Photo of this model. Image details

Community sentiment

What owners report

These are recurring themes in linked public owner discussions, not certified specifications or our reliability verdict.

Several owners on The Garage Journal report Pioneer mini-splits cooling workshops or running quietly.

Theme: Cooling and noise experience

Several · 3 first-person owner reports across 2 public discussions

A small sample can reveal themes, not failure rates. Thin or single-source themes are omitted rather than filled in.

Decision guide

At a glance

What the published numbers mean before you compare every spec.

Cold-weather output

At 5°F, certified output is 19,000 BTU/h — 68% of its 47°F rating.

ENERGY STAR ↗

DIY status not confirmed

The cited fields do not confirm a pre-charged line set or DIY-line designation for this model.

Electrical service

208/230V equipment; confirm the dedicated circuit and disconnect requirements with an electrician.

Manufacturer spec ↗

Heating efficiency in its size class

HSPF2 9.2 is below the 9.8 average among 74 models in the same rounded capacity class.

ENERGY STAR ↗

Good fit if…

Your room is near 1500–2000 sq. ft. under the ENERGY STAR starting-point assumptions, and a load calculation agrees.

Think twice if…

Your electrical plan does not yet account for 208/230V equipment, or your room falls outside the sizing range above.

Room guidance is a screening estimate for standard conditions. Check your room inputs; use Manual J for final sizing.

Certified spec table

Outdoor model numberYN030GMFI22M3ESource: ENERGY STAR Mini-Split Heat Pumps dataset ·
AHRI reference number208121964Source: ENERGY STAR Mini-Split Heat Pumps dataset ·
SeriesYNSource: ENERGY STAR Mini-Split Heat Pumps dataset ·
Heating capacity at 47F28,000 BTU/hSource: ENERGY STAR Mini-Split Heat Pumps dataset ·
Heating capacity at 17F20,000 BTU/hSource: ENERGY STAR Mini-Split Heat Pumps dataset ·
Heating capacity at 5F19,000 BTU/hSource: ENERGY STAR Mini-Split Heat Pumps dataset ·
SEER223.5Source: ENERGY STAR Mini-Split Heat Pumps dataset ·
EER212.2Source: ENERGY STAR Mini-Split Heat Pumps dataset ·
HSPF29.2Source: ENERGY STAR Mini-Split Heat Pumps dataset ·
Voltage208/230VSource: Manufacturer spec ↗ ·
Line set length range50 ftSource: Manufacturer spec ↗ ·

Values marked ENERGY STAR come from the certification dataset; values marked Manufacturer spec come from the linked product documents.

Specs not published for this model

The sources we cite do not publish these values for this model, so we leave them blank rather than guess.

Indoor model numberMinimum circuit ampacityMaximum breaker / fusePre-charged line setBrand DIY line

Check the fit for your room

Room-size guidance is a starting point, not a load calculation. Confirm sizing and installation requirements with a qualified contractor.

Check your room size

Explore more

Brand lineupCompare modelsCapacity chooserPre-purchase checklistSpec glossaryMiniSplitFinder home