Multi-zone sizing needs a load calculation
19,000 BTU is sized across zones. Each zone needs its own load calculation.
ACCA Manual J ↗
19,000 BTU heat pumpMRCOOL 19,000 BTU Multi-Zone
Model #: MULTI2-18HP230B
Compare sellers
Where to buy
Check model number MULTI2-18HP230B at your preferred retailer.
We may earn a commission when you buy through seller links on this site. Learn more.
Same housing as MULTI3-27HP230B; small details may differ.
Decision guide
At a glance
What the published numbers mean before you compare every spec.
Cold-weather output
At 5°F, certified output is 12,900 BTU/h — 68% of its 47°F rating.
ENERGY STAR ↗DIY status not confirmed
The cited fields do not confirm a pre-charged line set or DIY-line designation for this model.
Electrical details missing
Voltage is not published in the sources we cite, so confirm it before choosing equipment.
Heating efficiency in its size class
HSPF2 10.15 is below the 10.2 average among 125 models in the same rounded capacity class.
ENERGY STAR ↗Good fit if…
A room-by-room load calculation supports this outdoor system across the planned zones.
Think twice if…
You have not calculated each zone’s load.
Multi-zone systems need room-by-room load calculations and zone planning; use Manual J for final sizing.
Certified spec table
| Outdoor model number | MULTI2-18HP230B |
|---|---|
| AHRI reference number | 208552832 |
| Series | MULTI |
| Heating capacity at 47F | 19,000 BTU/h |
| Heating capacity at 17F | 14,500 BTU/h |
| Heating capacity at 5F | 12,900 BTU/h |
| SEER2 | 21 |
| EER2 | 13 |
| HSPF2 | 10.2 |
Values marked ENERGY STAR come from the certification dataset; values marked Manufacturer spec come from the linked product documents.
Specs not published for this model
The sources we cite do not publish these values for this model, so we leave them blank rather than guess.
Indoor model numberVoltageMinimum circuit ampacityMaximum breaker / fuseLine set length rangePre-charged line setBrand DIY line
Check the fit for your room
Room-size guidance is a starting point, not a load calculation. Confirm sizing and installation requirements with a qualified contractor.
Check your room size